Applique

A Show-and-Tell of My Experimental Quilting

Posted on by Betty Jo's Blog / Posted in Ancient manuscripts, Applique, Art Quilt Techniques, Deep space quilts, Design as you go, Design Work, Embellishment, Embroidery, Exhibits, skill building, Techniques, Videos

knight detail from “Equipped to Stand”

My family helped me produce a new video I could never have done on my own for my YouTube channel that is a discussion and trunk show of my experimental quilting.  I think you might enjoy seeing it.  Here’s the link:  video

For years I have thought of much of my work as experimental fabric art, where I try to get certain looks in my quilts and sometimes had to develop a new technique or figure out how to apply a known technique to produce the look I wanted or just to see what something would look like.  It has been a bit of a wild ride over the years and so it seemed the thing to produce a show and tell for you all.

Thanks to my family for their help and encouragement both for the videos and the quilting. There are some fun things on the way.

Sew happy everyone!

 

Textured Appliques

Posted on by Betty Jo's Blog / Posted in A Little How-To, Applique, Art Quilt Techniques, Design as you go, Techniques, Wool / 2 Comments

                                                    Detail from The Wizards’ Duel

Textured appliques can be derived from using a combination of techniques.  Such appliques can add major interest, even take center stage, on an art quilt and I find them really fun to do and a little challenging to figure out what needs to be done.  The detail shown in the picture above started off as  white basic quilting cotton that I washed and steam pressed.  Then I traced the applique outlines on the fabric using my light table, painted with artists water soluble crayons, backed the applique itself with wool batting, quilted (I think of this as “prequilting”),  backed with fusible  web, cut out closely to the applique, fused it down.  Then I and edge stitched it to the top.  After the quilt top was completely ready, I sandwiched the quilt with a double bat of wool on top and 80/20 cotton/poly on the bottom and did some more stitching to improve the look of the appliques.  I was particularly trying to help show muscles and shapes on the dragon and so I added more paint highlights, this time with iridescent Shiva sticks.

Here’s a little closer picture of the dragon so you can see it better.

That’s just an example, but I have used a lot of other techniques to get textured appliques for my work.  I’ll probably do a video on this…maybe within my upcoming tree series.  They need a lot of texture.

Sew happy everyone!  Have fun in your studio.

A Book, Videos, Sons, and A New Project Idea

Posted on by Betty Jo's Blog / Posted in Applique, Books, Classes, Embellishment, Food for Thought, Videos, Wool / 4 Comments

 

Books

My youngest son David, the author who shares my home with me and helps me in so many ways, will release a brand new book within a few days.  It’s the third book in his Law of Swords fantasy series.  I have read it and it’s terrific.  Truly, I think each book he writes is better than the last one and this one is no exception.

I am so proud and excited about this because David had to overcome a series of major difficulties (starting with a computer crash that somehow took both his regular data and all his backups in one event that included years of research, databases, and even bunches of writing.  Even the very skilled professional data recoverers were unable to get the data back.  He now has a new and better computer setup with all kinds of backups so it is unlikely to happen again. This and a handful of other obstacles has delayed his books for several years beyond the expected.

Now, though, he is rapidly producing what I am sure are wonderful writings right and left.  There is this book, as well as a requested short story for an anthology are written and nearly out the door, and he is diligently working hard on the second book in his sci-fi space series too with plans of completing that one by the end of the year.  Please wish him well on these endeavors. He is now a full time author without a secondary job so success is imperative. I’ll let you know when the new one is actually available for purchase.

My Videos

With a great deal of assistance from my oldest son Ken, the second in my video series about embellished wool applique by machine, is likely to be published early next week (there will be a blog for that one with a second downloadable handout).

I ask you please to subscribe to my YouTube channel if you haven’t already.  This is a great help to me with YouTube.  I need a minimum of 1000 subscribers and lots and lots of views before I can sign up for the small monetary return to support this work.  If you don’t know, “subscribe” is like “follow” on other sites and doesn’t sign you up for anything more than letting you know the videos are there.  You have to be logged on to Google or YouTube to subscribe and then to make a comment there or ask a question.

Ken is doing the video editing at least until I get my new computer (which has been delayed “because of Covid”).  I hope it gets shipped within a day or so, but in the meantime Ken is editing and publishing my videos for me.  He is so professional at this. I will have to try really hard to match that level when I finally get my computer and take back a lot of this work.  The third video will probably be out about two weeks later.  It is my plan to publish a video about once every two or three weeks for now.

In case you are wondering, all on my own I “film” the parts where I am at the machine and you only see my hands, and Ken helps with the part where you see my face.  Ken has, in fact, set it up so I can eventually do that part of the filming too, but I really like having his directing and filming with his fancy camera.  He does, however, have a job and a family.  LOL But he came to my rescue with microphones and  brackets and lights and instructions and editing.

My Idea for the Next Project

Ok.  The wool applique set will be done soon, so what am I going to do next?  Well, I have a long list of techniques and projects that I am considering on presenting in 2021. Only a few are wool based.  The videos on my YouTube site are and will be continuously free.  However, I am planning on offering downloadable workbooks and sometimes patterns to go with them for a reasonably low price (on my new website shop) that you can purchase to use with the videos.  This will hopefully help underpin the video work, which so far has required considerable investment.

Sew I have given it a lot of thought and decided the next subject will be “Trees”.  This will be really fun, but I leave it to you to wonder…what will BJ do with trees?  Later…I’ll tell you later.

Sew happy everyone!  Have fun in your studio and try making/learning something new that makes you stretch every now and then.

 

Wool Applique by Machine with Video Demos

Posted on by Betty Jo's Blog / Posted in A Little How-To, Applique, Art Quilt Techniques, Classes, Design as you go, Embellishment, Fabrics, Quilt Journal, Techniques, Threads, Tools, Videos, Wool

 

Wool sampler prototype piece part one. Embellishment will be presented in part two and quilting and finishing in part three.

Wool applique and embellishment is a great tool in a fabric artist’s quiver. There’s nothing else that provides the rich, warm, depth that real wool fiber does. It can make all the difference in achieving the artistic look you want. In my artist’s eye it compares to working with thick oil paints while cotton or silk is  like watercolors. Both are beautiful but achieve totally different looks.  Both require different techniques to get the best results.

So using a small project in wool applique I am finally launching my first video set  in my YouTube channel. Here is the link to the new video.  I have plans for multiple videos on my channel this year, and have just revamped my studio to include the things I need for producing them. So I would love you to subscribe to my channel and enjoy my videos just as a matter of interest or especially to  join me in working through the projects you like.  See the handout and pattern pdfs on my Aids and Links page here on this site for you to download and print out.  Then go to my YouTube video here.

* * * * * * * * * * * * * * *

Here is a list of the supplies with links that I will be using in this first project to which I have added links to help you in your shopping for the supplies:

1 yard of background fabric.  I am using all wool Melton, which I had in my stash.  Since the price of wool has skyrocketed since I filled my stash with it, I suggest using a melton wool blend for this, which is less expensive and still has a lot of the same characteristics and depth of beauty. Here’s another link at B. Black tailoring supplies, which is a fabulous store that has things that are difficult to find elsewhere.  A solid color quilting fabric would also work but will not provide the same deep sense of richness.

There is another option.  Use wool clothing that is no longer worn, or that you find in a thrift store, or use pure wool fabrics you have stashed under your bed in those storage boxes you put your clothing fabrics in. You may have had it for a decade and still haven’t made that garment you bought it for, like me.  Cut the clothing so you get the largest pieces from them and wash your wool in hot water with some detergent in your washing machine and dry it in your dryer.  This provides some amount of felting and cleans the fabric. It is also possible to dye this.  It requires all three elements…hot water, agitation, and detergent, to make it do a bit of felting the fibers together.  It does need to be pure wool for this to work well. The resulting fabric is also easy to dye in your washer.

One package of lightweight woven fusible interfacing sufficient to cover the yard of background fabric, such as  Pellon SF101 Shapeflex

One pack of precut melton wool felt pieces in a variety of colors for flower heads and a pack of a variety of green pieces for stems and leaves. You will probably have enough felt pieces for a couple of small wall hangings or other wool applique projects.  Be sure to save all the leftovers for small applique uses elsewhere. Please don’t use craft felt not made with any wool.  The comparison is like using paper to fabric. You can use wool blend felt, but pure wool really makes a big difference in how this looks.

Aurifil 12 weight wool blend thread (small spool collection)  or (large spool collection..the best value by the yard) or three or four colors of the large spools.  If you prefer to use a 12 weight cotton as a slightly cheaper alternative I recommend Sulky 12 weight cotton,  for this project, it will still look beautiful, just different and not quite as close to hand done that the wool thread will provide.  I have even successfully used 40 weight  all poly embroidery threads, and I sometimes have mixed them across a project in order to get particular looks or colors.  The wool adds a depth of beauty and is probably what most hand stitchers would use. You should do some testing to see how they look.

1 black 12 weight Aurifil wool thread or Sulky 12 weight cotton for outlining.

1 spool of Superior monopoly or multiple colors matching the applique fabrics of light weight threads such as 6o to 100 weight polyesters or silks. I used both the monopoly and 100 weight threads.

2  packs of fusible web. I used Steam a Seam2 for my project and it works well.

1oo/16 top stitch needles

universal 80/12 needles if you choose to use monopoly thread for your appliques. I found the Schmetz super non stick needles really helps with dealing with the fluff from wool combined with the fusible web.

1 piece of backing fabric about 25 x 25 inches (for the back of this small quilt)  This is a good thing to pull from your existing stash.

Small piece of lower loft batting about 25 x 25 inches.  I am using 80/20. This is a good place to use leftover batting from a larger quilt project.

Bohin mechanical chalk pencil to mark the wool with, if needed.

And whenever I use fusibles, I like to have on hand this effective iron cleaning kit good for multiple cleanings that I have successfully used for years: Rowenta Iron cleaning kit

* * * * * * * * * * * * * * *

While you can print the pattern out and use it to cut out your appliques, I did cut all my appliques using my Accuquilt Go! machine, which I really like for such projects.  I have had mine for some years, collecting dies a bit at a time, and use it a lot for circles, rectangles, strips, bindings and borders and projects such as this.  In my opinion, it is well worth the investment required.  I can cut out a simple snuggle lap or crib quilt of squares and a border (prestarched) with a few fun appliques to snazz it up (backed with steam-a-seam 2)  in ten minutes (after the fabric is pressed with starch) and make the quilt top all in the same day.  Everything is nice and accurate too, very unlike it looks if I do my own cutting.  Hahaha.

I used the following three dies for this project and it only took a few minutes for all the shapes I needed with some leftovers:

Go Circle (1 1/2″ to 2 1/2″) it’s so hard to hand cut good circles.  These are beautiful. If you can only get one dye set for this project, this might be it.

Go Round Flower

Go Stems and Leaves 

Sew happy everyone!  Let’s get started.  Please feel free to ask questions using comments here or on the YouTube channel.

 

A Website Update and the Wool Applique Project

Posted on by Betty Jo's Blog / Posted in Applique, Classes, Design as you go, Embellishment, Fabrics, Food for Thought, Threads, Videos

Hi everyone.  Well, I completed the update on my website and am reasonably happy with it.  I did not yet put the store in operation because I still am working on the downloadables I am planning to sell there.  My goodness I have been busy!

A digital design I created last year. It seems like winter to me with snowflakes that look like butterflies…LOL.

I have been having fun though.  This week I am embellishing my wool applique by machine sampler with decorative stitches using 12 weight Aurifil wool blend thread.  I have been really enjoying figuring out which stitches to use on each applique and how to set them.

Sampler one part one. Here we have the simple shapes of the sampler in place, ready to begin the embellishment/embroidery.

Since I used Steam-a-Seam 2 fusible for the appliques, and they are felted wool going on to Melton boiled wool background using wool thread, there is a lot of fluff!  So the fluff stuck to the needle and filled the bobbin area.  I just cleaned out the bobbin when my machine complained about the bobbin and it was just fine.  But I had just gotten a package of Schmetz super non stick 90/14 needles.  Now one needs that size needle for 12 weight threads, and I was using a Superior top stitch, which is a fine needle that I use for most of my work, but the fluff from all this wool was continuously climbing up the needle and had become problematic.  So I tried the non-stick needle and was astonished at how the fluff on the needle just went away!  The stitching went forward with no further problems other than stopping every now and then to clean out the bobbin area, which isn’t very hard to do. My bobbin sensor lets me know when it cannot “see” anymore.  LOL

Truly I encourage you all to try some embellished applique by machine.  Realize it isn’t very fast, in fact it is kind of slow when properly done, but it is beautifully satisfying to do and just plain fun!  So keep it small for your first projects! In another week or maybe  a little more, I will have the first of my embellished wool applique by machine videos up and running.  I will tell and show you what I have learned about this technique.  I invite you to join me in making a sampler of your own.  I know you will enjoy it.

Next week I will post a list of supplies for the project with links of where you can get them and I will also put a pdf downloadable handout here for you to use too.  This class and downloads are free. I do, however, have plans for presenting many other techniques and projects by video where the project workbooks and patterns will be available for sale on my new website shop.  I hope to keep the videos free, but we will see how that goes.  Keeping the videos free will depend on how many subscribers I get to my channel and how many people buy the downloadales.

Sew happy everyone! I hope you are enjoying a Happy Hanukkah and Christmas season.  It’s my favorite time of the year. Blessings everyone!

 

 

Embellishing Appliques by Machine

Posted on by Betty Jo's Blog / Posted in A Little How-To, Applique, Art Quilt Techniques, Design as you go, Embellishment, Embroidery, Fabrics, Machines / 2 Comments

I have been having fun in my studio this past few days while I worked on my wool applique sampler.  I got all the pieces appliqued and have started the fun part of adding decorative stitches to turn them from simple shapes into interesting flowers.

As an example, here is one of the flowers appliqued and ready to embellish.  I used a combination of all wool felt and wool blend felt.

 

Here is the same applique after I added some decorative stitching using wool blend 12 weight Aurifil thread.

I may decide to add more stitching to this particular flower. It was helpful to me to see it in the photograph.  Somehow pictures of my work gives me a different perspective.  I may decide, instead, however, to use some free motion quilting to add more details to this flower.

Here is a little closer view of the flower heads and flower stem that I also embroidered with some decorative stitching.

Sew it is a layered process, and while I have a general idea of what it will look like when finished in my mind’s eye, I make adjustments and changes from my original concept as I go.

In any case, I find this phase of the project really fun as each addition changes the appliques and I see my original concept emerge into reality.  The last thing I will do before sandwiching and quilting it is to add some patches of grass and maybe a bug or animal around in the grass.  The quilting should also make its own addition to the overall interest of this little wall hanging.  I am considering how to finish the edge.  Should I bind it in cotton or edge stitch it with some heavy weight specialty thread, or even try out that yarn couched edging that Nina McVeigh demonstrated in one of the Bernina videos on The Quilt Show?

One of the useful little bits I learned in the process was how well the Schmetz Super non stick needles helped solve the problem I was having with the wool felt that I had fused on with Steam-a-Seam 2 sticking to the needle. It was getting balls of felt fuzz climbing up the needle until I switched needles.  Then I had no more problem with that so far.  I was rather astonished.

I’m not sure you can really see the various stitches in this picture, but you can see how I added the numbers of the stitches just above each stitchout.

I made a little test piece to help me decide which decorative stitches I want to use. I also tested the way I stitched them out.  For this I used the machine automatic knot it will stitch out if you ask it to both at the beginning and the end.  I also stitched them with a specific number of repeats and then just stitched using a slow set of the speed and the start button, rather than the foot pedal.  This allows for the machine to stitch out a very even pace, which makes decorative stitches more beautiful.

So when I set it up to go around those circles, I set it to stitch one repeat without turning (basically hands off), and then turn the fabric before doing the next repeat. It makes for a very nice embroidered stitch, almost like good hand embroidery, especially when using a nice thick thread like Aurifil Lana wool blend 12 weight thread.

One thing I learned about working with all this wool and wool thread is that I need to clean my machine a lot more often because both the fabric and the thread produce lint down in the bobbin area of the machine. It is well worth it though, because it is lovely.

I have a long ways to go before I finish this sampler, but I am really having fun with it. I am also video taping here and there as I go.

Sew happy everyone.  I encourage you to try your hand at wool applique by machine.  In just a few weeks I will come out with my three part video class on YouTube that will use this very sampler and the techniques I am talking about here.  I will have a free downloadable handout here to go with it.  That effort is progressing nicely finally.  I decided to produce all three videos before I posted the first one. Cheers everyone.  Happy Advent!

 

 

 

Dealing with Stitching Pull and Video Update

Posted on by Betty Jo's Blog / Posted in A Little How-To, Applique, Art Quilt Techniques, Embellishment, Tools

I digitized this olive tree from a non copyrighted photograph and stitched it out on black nylon tulle with wash away stabilizers. I then removed the stabilizers and tore away the visible tulle. What you see here is the tree ready to applique to my quilt Noel. It would have produced a great deal of thread pull had I stitched it directly to the quilt top.

Heavy machine stitching always pulls the fabric and if done directly on a project can leave the surrounding fabric unacceptably ruffled.  Some of this can be dealt with on shrinkable natural fabrics, such as cotton or wool but not so much silk, by steaming the area upside down on a wool ironing mat or a thick pad of towels.  Polyester fabrics will not respond to steam shrinking attempts and is possible to damaged it with the  amount of steam one might try to use.  Really heavily stitched motifs are almost impossible to steam out regardless of fabrics except wool, but it may be possible to  “quilt that out” in some cases though it is not easily accomplished and doing this is very stressful in any case.

Such headaches and fails can be avoided by stitching off-project and appliqueing the finished motif on to the project background.  If you do it right, it is most often very difficult to tell that it is an applique and not directly stitched, but even if you can tell, it is preferable to the pull.

So there are several ways to approach this that usually involve machine work inside a hoop and wash away stabilizer.  I have a relatively large collection of embroidery hoops I collected over the years.  I found most of them can work for machine work, but some are just too wide to easily get under the presser foot.  There are hoops that are designed for working with a machine, and can be used for hand embroidery. I find a 7 or 8 inch hoop works well.  Here are a couple of models I like:

  • three plastic spring hoop set I have had a set similar to this for years, and this may be the same set.  I don’t know for sure, but it works well for free motion embroidery and is thin enough to slide under the foot.  It is also easy to adjust the area in the hoop when you need to without taking it out from under the foot of the machine.
  • three wood traditional style set.  This is .6 inches high,  I think this will happily slide under the foot if you angle it a bit.  I do not have this set myself although I do use a couple of very old wood hoops that I have had around for a while and they are .5 inches wide and work ok with the machine.

Here is the setup for free motion embroidery.  I do also add the Super Slider on the machine to make it work really smoothly when I am using my domestic machine.  I find I really don’t need the slider when I do the embroidery on my Bernina Q20 sitdown longarm, which I find I prefer now that I have that option.

 

Here I am stitching a horse’s tail for my quilt Canterbury Knight using the method described herein.

Here is the tail on the horse on the quilt. There is not enough contrast to see it well, but after it was quilted it showed up fairly well.

Horse with newly groomed tail

And the final finished quilt that has won several nice ribbons.

Canterbury Knight

Surprisingly, I found when working with my Bernina Q20 sitdown longarm that the heavily weighted gripper rings designed for quilting work wonderfully as hoops for free motion embroidery when using that wonderful machine.  I don’t have a link for that, but they are available probably for order at a Bernina dealership.  I balked at the price, but waited for a really good sale and I really really like them.  I know you can get a cheaper black set without the open space on the rings for sliding on, but I love the lovely red of the rings as well as the little open spaces.  For these, you just put the layers together and the first thing you do is stitch around the layers  well away from your design to hold them together much as you would do for a quilt sandwich.  These would probably not work well on a domestic machine, even the machines with larger harps, but they are divine on my sitdown longarm for both quilting and embroidery.

https://www.franknutt.co.uk/media/catalog/product/b/e/bernina_gripper_rings.jpg

So I set up my motif build with a layer of heavy clear washaway stabilizer, such as OESD badge master, or Sulky Super Solvy on the bottom, on which I have lightly marked the design guidelines with a Crayola Fine Line Washable Marker.  On top is a layer of nylon tulle to hold everything together even if it isn’t a stand-alone design.   I find when it is finished and I soak away the stabilizer, the tulle can be gently torn along the edge of the stitched motif and not seen at all once appliqued.

If the motif also includes a fill of applique fabrics, I cut the shape and glue them to the tulle with washable glue stick and that is the first thing I stitch around to hold them in place before beginning.  Then I hoop the whole thing together with the inside hoop on top so the fabric/stabilizer bundle is flat on the bottom.

Now I use the same kind of sandwich if I am doing digitized in-the-hoop machine embroidery motifs.  Here’s one I made that way that also went on Noel.

I digitized this star and then embroidered it off the quilt using the method described herein.

After I soak off the washaways and let it almost dry but is still a little damp, I will press it upside down on my wool ironing pad with a light weight cotton ironing cloth over it.  It then can be basted down in place on your project and attached with a narrow zig-zag or free motion off and on the motif using the same thread you used at the edge of the motif.  I usually also stitch inside the motif just a little where appropriate to give it some concept of having been stitched directly in place and highlight some of the shaping.  It doesn’t take much stithing to make it wonderful.

You would be amazed what you can do with this method by just adding that little bit of tulle and over=stitching a tiny bit after placement on the main background. Then  you won’t have the ruffles.  You can also use this method to make some interesting trapunto designs.

Video Update:  My oldest son decided he needed to provide some significant help for my video making and asked me to pull the original video on Wool Applique by Machine.  Don’t worry folks, if you were interested in my videos, they will happen and will be far better than they would have without his assistance.  I will certainly announce the videos when they are available.  This should not be very long from now…maybe a week or two for the first one, but I will let you know.  I have a long list of vlogs and video classes I am planning.

Sew happy everyone!  Go make something wonderful.

 

 

Fine Tuning Fabric Art: Applique Styles

Posted on by Betty Jo's Blog / Posted in A Little How-To, Applique, Art Quilt Techniques, Deep space quilts, Design Work, Fine Tuning Series

Hi all y’all.  Do you enjoy applique or do you only use it when there is absolutely no other way to get the look you want?  I was surprised several years ago when I attended a major quilter’s class and she introduced me as an applique-er.  After thinking about it, I think she is mostly right.  I thoroughly enjoy applique of several artistic techniques. I select the technique by their complexity, the kinds of fabrics I am using, and the style I want to show.  These include:=

  1. fused or glued stitched raw edge
  2. placed and held in place by veiling and then free motion stitched down.
  3. turned edge glued and blind stitched by machine
  4. applipieced/pieceliqued
  5. In-the-hoop applique

For complex edges, especially, my favorite technique is stitched raw edge applique.  This is where I fuse it down and stitch along the edge using either a narrow vari-overlock stitch (like a hem stitch but it has fewer stitches between the zig-zag stitch) with a Superior monopoly thread or a 100 weight polyester or silk matching thread so it basically disappears. Narrow blanket stitch also works well.  I don’t particularly like zig zag for this, but I know some who do. I also found I cannot get a good result for complex appliques without some kind of adhesive use along the edges.

The Announcer, the Horse, and Bird appliques From Canterbury Knight are all stitched fused edge appliques hand painted by me.

To show off the edges I very much like the blanket stitch using decorative thread picked to show.  I don’t see a difference when doing this using raw edge or turned edge appliques, because the edge is covered with the thread.  The blanket stitch may be either a double blanket stitch if you REALLY want to see it, or a single using a heavier 12 weight thread so it highlights the edges.  This is a particularly good approach if you are having problems with your applique not showing up well because you chose to use fabrics that are close in value or color.  Sometimes I have found it very difficult to carry out the design I have in my head with a clear value difference between the applique and the background. I also can fix this problem with a hidden edge applique technique combined with a straight stitch outline stitched along the edge in a contrasting color decorative thread.

Dad’s House Plan. The house and roof of this quilt were turned edge machine stitched appliqued in most places.

For less complex shapes, I have found the turned edge with the vari-overlock narrow stitch with monopoly or matching 100 weight thread looks very close to turned edge hand stitched applique.  In my case, the machine stitched looks much better.  haha. If you don’t have a vari-overlock stitch on your machine, it is very similar to the blind hem stitch that nearly all today’s machines have in their utility stitch set, it just has more straight stitches between the zigs or zags, so making the stitches shorter overcomes that problem.  I start by turning the edges around either a piece of lightweight interfacing that is going to stay in place, or a freezer paper shape ironed to the back.  I usually find that just grocery store starch I paint on with a small stencil brush works well to hold the turn in place, and then remove the freezer paper before gluing it in place to the background.  One can glue it however, with washable glue sticks, and a lot of applique-ers do that.

Here we have a complex edge that I have starched the turn over with starch onto freezer paper. The next step would be to remove the freezer paper, turn it over and stitch it in place onto the background fabric. You might want to iron the turn down a little more after removing the paper.

When I am making one of my deep space quilts, I make the “gas cloud” that surrounds and plays throughout a galaxy from hot fix angelina fibers.  These fibers only stick to themselves and flatten out into a sort of fabric so they don’t stick to the background fabric.  You can’t use a fusible web with it because it shows, nor can you use glue because even if it dries clear you can still see it through the clouds.  So I cover it with black nylon veil and just free motion stitch it into place.  I may pin it a few times, but I don’t even like to do that, because the holes remain if you happen to hit it just wrong.  So I just have to hold it in place and stabilize it with a little of the stitching before I do the free motion embroidery-like quilting. I think this method would work well for a net or lacy applique also.

Sky Horse photographed by Ken Tatum

And then for piecing together areas like adding mountains or suns or other large parts of a pictorial quilt, there is applipiece (Caryl Bryer Fallert-Gentry’s term) or piecelique (Sharon Schamber’s term) where the piecing is done using turned edge applque stitched  (as described above under “less complex shapes”) from the top by machine usually using monopoly or very light weight thread and the vari-overlock or blanket stitch and then cutting the area joined from the back down to a little less than a quarter inch seam.  The complex edges require snipping into the edge periodically to facilitate the turning around the shapes).  This is one of my favorite methods when creating a pictorial or other free style design background.

The Storyteller, a Hoffman Challenge piece where the entire background was applipieced/pieceliqued together.

In the hoop applique requires “a whole nother” set of activities and skills beginning with digitizing your design in software or purchasing a commercial embroidery design.  I use this occasionally, but not often.  It usually uses satin edge stitch to sew down the appliques, though it sometimes uses blanket stitch.  If I am going to use satin edge I try to do this in the hoop because the satin stitch can then be digitized to have beautiful miters and properly angled stitching, which is really difficult just using the satin stitch outside the hoop.  It is possible to get a nice satin stitched edge for simple shapes with care in regular nonhoop stitching though.  Then you can add additional decorative stitching in-the-hoop for nice results.

5″ x 5″ fabric greeting card or mug rug in the hoop

You can read more about this method in my book Twelve Skill-Building Projects for Bernina V8.

That pretty much covers the methods I use for applique.  I am using stitched raw edge applique that has been attached with Steam-a-Seam 2 for my wool applique by machine.  First I am stitching it down with monopoly and then I am doing the decorative stitching around the edges and inside the appliques.  This means I can use the decorative stitches to make the look I want without worrying about whether or not the stitch catches the edge of the wool applique, which I find a big advantage.

Detail showing some of the stitching on my practice wool piece

Sew happy everyone!  Put on some good music or an audiobook and start with a small applique project.  It is fun, but it does require some time to get it right.  Still, by machine is faster, or at least less problematic for arthritic hands than by hand, however beautiful it is.

 

 

Upcoming Free YouTube Class

Posted on by Betty Jo's Blog / Posted in Applique, Classes, Embellishment, Food for Thought, Quilt Journal, Threads, Videos

Hi sewists, fabric wizards, and all round lovers of fabric, thread, and maybe paint for making something fun or beautiful.  Do you admire those beautiful wool applique items that are often made all by hand, but would like to try making something similar by machine? I am going to present a free video class with multiple videos on YouTube in the next few weeks (I’ll announce exactly when shortly), and I hope you will join me.

I  am planning on presenting a simple shapes project in wool applique.  It  will be easy and fun, but it requires some complexity of teaching to cover it  adequately so I will be dividing this in three or four video classes on YouTube. This will provide the techniques for making a beautiful small machine appliqued and embellished wool wall hanging to celebrate Fall.

If you want to participate in this, you will want to gather the supplies for this free class.  I am thinking the first video, which I have already shot and am currently editing will be ready some time next week.

Sew here is the list of what you may wish to gather (with links) if you want to make one or two.  Mine is 22 by 25 inches, but you can make yours the best fit for where you want to place it.  It is kind of free style field of flowers using simple shapes and the result will make a nice gift or decoration for the fall season.  You probably have a lot of these supplies already, so check your stash first, but here are some links to what I use if you need to do some shopping.

  1. Background piece…I recommend a yard of melton wool (boiled felted wool) in a dark or deep color:  Black wool (this linked page has other color options); or you can use a solid quilt cotton if desired.  A yard of the wool is 58 inches wide and so it will make two or even three small wall hangings and it has a lovely look when complete. You can also use a less expensive wool blend coating  with real success.
  2. Six or more colors of small pieces of wool felt.  Be sure to include some green if you like green stems and leaves.  I have found precut sets for somewhat reasonable prices in two places and there are several selections for you to choose from. You may have trouble picking because they all look lovely, so maybe buy more and plan on making two.  Here are some suggestions:
  3. Two yards of fusible lightweight interfacing to stabilize the background fabric. Either of these will work.
  4. Steam a seam fusible
  5. A selection of your favorite 40 weight embroidery threads, light weight bobbin thread that matches the background, Superior Monopoly, and 12 weight wool threads (if desired).  I use a wide variety.  Wool thread is expensive, so I suggest you start with the small spools set that will be suffecient for you to do this project and lets you see if you like using it before investing in larger spools.
  6. High quality Sewing Machine needles (these are the ones I use):
  7. Sew check my page Aids and Links at the top of this blog or on the menu if you are reading on a phone.  There you will find a pdf file with simple shapes for wool project that provides patterns for simple shapes if you need them.  Download this and print it.  Or, you can use your simple circles, leaves, and vines you may have in Accuquilt Cutter dies instead if you have these.
  8. A piece of batting that is not very thick large enough for the background piece.  This is a good place to use some of that leftover batting.
  9. Cotton quilting fabric large enough for the back of this little quilt and binding (if desired, though you may wish to do a finish edge with decorative stitching).

I am still very new at making these videos, so that is why I can’t figure out exactly when I will be able to publish them.  My tentative deadline for this is next Wednesday.  Of course, since it is a YouTube video, once it is published you will be able to use it any time and watch more than once.  This first class and the downloads are free, but it would be lovely if you use my links for your supplies.

Sew happy everyone.  Spend some time in your studio.

 

Simple Shapes for My Wool Project

Posted on by Betty Jo's Blog / Posted in a pattern, Applique, Art Quilt Techniques, Design as you go, Fabrics, Project Management, Quilt Journal, Tools, Uncategorized, Videos

Sew earlier this week I got everything ready to make my first video and then discovered I was missing a cord to connect the little monitor I need to my Sony Handicam camera.  Now I don’t know about you, but I don’t think identifying cords needed in the computer world is the easiest thing to do,  Thank GOODNESS I have my own family geek squad.  Hahaha.  My son David helped me to identify what I needed and looked through our huge collection of cords, but we didn’t have the right one.  So I ordered it and it is supposed to come today. If it comes, I hope then to get my first video on YouTube sometime next week.  I don’t know how long this whole video making and editing will take me, but my tentative plan is to put one up a week at first.

Sew I got all ready to make the first item for my book/video wool project.  It is called “Simple Shapes” and it is a small wall hanging, and I really invite you to join me in making one yourself.  I will be providing all kinds of help here and even videos demonstrating it.

For several years now I have had an Accuquilt Go! cutter, and have, over the years, collected a fair number of their dies.  I find the dies are wonderful for this particular kind of project, and also I cut all my bindings and borders on it.  It’s much more accurate than I am…LOL.

I also use it to cut my 8 inch blocks I use for cuddle quilts.  I used it when I work with my grandson, who made a couple of simple quilts with my help several years ago, and he was able to cut his own quilt pieces safely.  It’s just a very helpful tool in my studio.  Yesterday it took me only about half an hour to cut out all the pieces I need for this, and most of that time was because I am backing them with Steam-a-Seam  fusible before I cut them, and I had to get that ironed on.  This makes the wool feed through the cutter so nicely and hold the pieces nicely in place.  I have other methods to do this too, but this one is my favorite.

However, if you don’t have a cutting machine and don’t want to buy one right now but want to follow along with me and try your own hand at wool applique by machine, I have made a pdf pattern with simple shapes that you can download and use.  You can find the pdf file on my Aids and Links page on this blog (see the links at the top of this blog).  I know you could draw your own, but why bother, since I have them all put together in the free pattern. They are not necessarily the same as those on my dies, but close enough.

Sew I cut out a bunch of shapes from fun several colors of the wool felt I talked about in my last blog.  As I promised, I also looked around and found you can get satisfactory quality sets from Amazon if you want to make one of these wall hangings yourself.  I would love to see you join me in this fun project. I recommend you get four sets and you will have enough for several projects. Just click on the links below.

I also found a melton wool blend in black that would make a nice background, or you can use a nice solid color quilting cotton for the background. If you get a single yard the wool, it is large enough to make two or even three small wool projects, because these are small little jewels of projects and the yard is 58 inches wide. These would make nice Christmas or other celebration presents.

Sew now that I have all these simple shapes cut out  I will arrange them in a flower arrangement of some sort.  Follow this blog in the future to see what to do.  Note that I also cut some stems and vines about 1/4 inches wide and some leasves shaped from the felt that are not on my pdf but I did use the stems and leaves die on the Accuquilt site also.

I will talk more about what to do with all these shapes in future blogs, but you might guess if you look again at my last blog where I show a lot of the test piece I did.  I will be demonstrating this on my video, assuming I am successful in getting that done.  LOL  I will be linking to my video in my next blog probably.

Test and practice piece

Sew happy everyone!  Teach someone to sew or quilt or at least encourage sewists and other fabric wizards you know.  Even the most advanced folks need encouragement.  Sending you all hugs!